YANG Gao-bo, XU Tie-feng, ZHOU Ya-xun, et al. Design and fabrication of a device for quick measuring the mode-field radius of single-mode optical fibers. [J]. (3):55-57(2004)
YANG Gao-bo, XU Tie-feng, ZHOU Ya-xun, et al. Design and fabrication of a device for quick measuring the mode-field radius of single-mode optical fibers. [J]. (3):55-57(2004) DOI: 10.13756/j.gtxyj.2004.03.016.
Design and fabrication of a device for quick measuring the mode-field radius of single-mode optical fibers
摘要
用FPGA可编程控制器来控制步进电机带动放置在光纤端面远场区域的一个透光圆孔屏障沿光轴线移动
从而调节PIN光电管接收到的光信号强度.用锁相放大器来提高光电信号的信噪比
信号被快速采样后输入FPGA控制器
经过数据处理后显示所测单模光纤的模场半径.测量仪具备较好的测量精度和重复精度.
Abstract
A barrier with circular-hole is placed in far-field area of a fiber
and the source light’s intensity received by PIN tube is adjusted by moving the barrier along the optical anxis with a stepper motor
which is controlled by a FPGA chip. A phase-locked amplifier is used to improve the signal-to-noise ratio of photoelectricity signal
and the FPGA chip is also utilized to incept the sampling signal and calculate the mode-field radius of single-mode optical fibers quickly. The device has good measuring and repeating precision.
关键词
单模光纤模场半径远场
Keywords
single-mode optical fibersmode-field radiusfar-field area