Study on the manufacturing process of microstructure optical fibers

CHEN Wei; LI Jin-yan; LI Shi-yu; LI Hai-qing; JIANG Zuo-wen; CHENG Yu

doi:10.13756/j.gtxyj.2005.03.015

您当前的位置：

首页 >

文章列表页 >

Study on the manufacturing process of microstructure optical fibers

- Study on the manufacturing process of microstructure optical fibers
- Study on Optical communication Issue 3, Pages: 47-48(2005)
- 作者机构：
  
  1. 烽火通信科技股份有限公司光纤研发部
  2. 烽火通信科技股份有限公司光纤研发部湖北武汉　430074
- 作者简介：
- 基金信息：
- DOI：10.13756/j.gtxyj.2005.03.015
  CLC： TN805
- Published：2005，
扫描看全文
[1]陈伟,李进延,李诗愈,李海清,蒋作文,成煜.微结构光纤的制造工艺研究[J].光通信研究,2005(03):47-48+60.

CHEN Wei, LI Jin-yan, LI Shi-yu, et al. Study on the manufacturing process of microstructure optical fibers. [J]. (3):47-48(2005)
[1]陈伟,李进延,李诗愈,李海清,蒋作文,成煜.微结构光纤的制造工艺研究[J].光通信研究,2005(03):47-48+60. DOI： 10.13756/j.gtxyj.2005.03.015.

CHEN Wei, LI Jin-yan, LI Shi-yu, et al. Study on the manufacturing process of microstructure optical fibers. [J]. (3):47-48(2005) DOI： 10.13756/j.gtxyj.2005.03.015.

摘要

构建了基本的微结构光纤制造系统

初步形成了可行的微结构光纤制造技术路线。利用该工艺技术制造出了全内反射（TIR）型微结构光纤

该TIR型光纤纤芯为9.5μm

空气孔等效直径为9.8μm

孔间距为12.3μm

在1385nm的羟基吸收峰为0.106dB/m

1550nm的衰减为0.008dB/m;该微结构光纤经过显微镜放大和CCD采样到计算机得到的图片表明:光纤中空气孔基本均匀

并且微孔点阵基本呈现正六边形排列。

Abstract

In this article

the manufacturing system of microstructure optical fibers was set up

furthermore the feasible technical route for producing microstructure optical fibers was basically formed. Using this technology

we have manufactured total internal reflection（TIR） microstructure optical fibers. The TIR fibers have 9.5 μm core diameter

9.8 μm effective diameter air hole

and distance between the center of two holes is 12.3 μm

the hydroxyl absorption peak of 1 385 nm is 0.106 dB/m

the attenuation at （1 550 nm） is 0.008 dB/m. From the photos of the microstructure optical fiber obtained by microscope and through CCD sampling to computer

we could find that the air holes are distributed uniformly

what’s more

the micro-holes lattices are just hexagon on the whole.

关键词

微结构多孔光子晶体光纤工艺

Keywords

microstructureholeyphotonic crystal fiberProcess

references

更多指标>

Views

236

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and fabrication of large mode-field wide-frequency single-mode photonic crystal fibers

Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor

Design of High Sensitivity Photonic Crystal Fiber Temperature Sensor

Research on Temperature Sensing Characteristics of Mach-Zehnder Interferometer based on Photonic Crystal Fiber

Analysis of Flattened-Dispersion Characteristic of a New Type of Double-Mode Photonic Crystal Fiber

Related Author

No data

Related Institution

Optical Fiber R&D Department of FiberHome Telecommunication Technologies Co.,Ltd.

烽火通信科技股份有限公司光纤研发部湖北武汉430074

School of Science, Hubei University of Automotive Technology

School of Information and Control Engineering, China University of Mining and Technology

School of Optoelectronic Engineering,Nanjing University of Posts and Telecommunications

Postal code：430205
Technical support is provided by Beijing Founder electronics co., LTD 鄂ICP备2022010197 鄂公网安备 42011202002092号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：75841 Visits Today：29

⁰