A Novel Rogue Detection Method in PON System

HUANG Jian; WANG Zhe; GUO Xiao-long

doi:10.13756/j.gtxyj.2017.02.003

您当前的位置：

首页 >

文章列表页 >

A Novel Rogue Detection Method in PON System

- A Novel Rogue Detection Method in PON System
- Study on Optical communication Issue 2, Pages: 9-11(2017)
- 作者机构：
  
  1. 中兴通讯股份有限公司上海研发中心
  2. 中国电信股份有限公司上海分公司
- 作者简介：
- 基金信息：
- DOI：10.13756/j.gtxyj.2017.02.003
  CLC： TN929.1
- Published：2017，
扫描看全文
[1]黄健,王哲,郭小龙.一种无源光网络系统中的长发光检测方法[J].光通信研究,2017(02):9-11.

HUANG Jian, WANG Zhe, GUO Xiao-long. A Novel Rogue Detection Method in PON System. [J]. Study on Optical communication (2):9-11(2017)
[1]黄健,王哲,郭小龙.一种无源光网络系统中的长发光检测方法[J].光通信研究,2017(02):9-11. DOI： 10.13756/j.gtxyj.2017.02.003.

HUANG Jian, WANG Zhe, GUO Xiao-long. A Novel Rogue Detection Method in PON System. [J]. Study on Optical communication (2):9-11(2017) DOI： 10.13756/j.gtxyj.2017.02.003.

摘要

提出了一种在PON（无源光网络）中实现长发光检测的方法

通过对上行光信号进行SD（信号检测）采样

再基于SD信号是否有效来判定是否存在长发光现象。OLT（光线路终端）首先构造一个短时隙通过光模块下发给ONU（光网络单元）

并控制光模块根据该短时隙对上行光信号进行SD采样

得到第一检测结果;OLT根据第一检测结果判断上行光信号是否有效

在判断结果为是的情况下

OLT再次构造一个长时隙下发

并基于该长时隙对上行光信号进行SD采样

得到第二检测结果;OLT根据第二检测结果确定当前PON口是否存在长发光现象。相比常用的光功率检测方式

文章所提方法具有更高的可靠性和准确性

且不会占用固定带宽

最大限度地保证了上行带宽的利用率。

Abstract

A novel rogue detection method is proposed to determine the ultimate result based on the validity of SD sampling over upstream optical signal.The OLT constructs a short timeslot and transmits it via an optical transceiver.Then

the OLT controls the optical transceiver to conduct a first SD sampling detection to the upstream optical signal according to the short timeslot to obtain a first detection result.Next

the OLT judges whether the upstream optical signal is valid according to the first detection result.If it is valid

the OLT constructs a long timeslot and transmits it via the optical transceiver

and controls the optical transceiver to conduct a second SD sampling detection to the upstream optical signal according to the long timeslot to obtain a second detection result.The OLT determines whether the current PON port is experiencing rogue behavior according to the second detection result.Compared to the common RSSI detection method

the proposed method has higher reliability and accuracy with the fact that no more fixed bandwidth will be occupied so as to assure the upstream bandwidth utilization as much as possible.

关键词

无源光网络光线路终端长发光检测信号检测

Keywords

passive optical networkoptical line terminalrogue detectionsignal detection

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Verification of DBA based on UVM in Passive Optical Network

Hybrid Linear Iterative Signal Detection Algorithm for Massive MIMO Systems

Generalized Weighted Gauss-Seide Iterative Algorithm based on Preprocessing in MIMO System

Investigation of Key Technologies in High-Speed Optical Access Network（Invited）

Based on Superposition Coded for Spatial Modulation System Design

Related Author

No data

Related Institution

Wuhan Research Institute of Posts and Telecommunications

FiberHome Telecommunication Technologies Co., Ltd.

Chongqing Information and Communication Consulting Design Institute Co., Ltd.

School of Electronics & Information Engineering, NUIST

State Key Laboratory of Advanced Optical Communication Systems and Networks, Shanghai Jiao Tong University

⁰