Improved Plane Strain Model for Thermal Stress Analysis of Planar Optical Waveguide

LI Chang-an; QUAN Ben-qing; GUAN Wei-lin; JIANG Yi

doi:10.13756/j.gtxyj.2019.02.011

您当前的位置：

首页 >

文章列表页 >

Improved Plane Strain Model for Thermal Stress Analysis of Planar Optical Waveguide

- Improved Plane Strain Model for Thermal Stress Analysis of Planar Optical Waveguide
- Study on Optical communication Issue 2, Pages: 47-50(2019)
- 作者机构：
  
  武汉光迅科技股份有限公司
- 作者简介：
- 基金信息：
- DOI：10.13756/j.gtxyj.2019.02.011
  CLC： TN252
- Published：2019，
扫描看全文
[1]李长安,全本庆,关卫林,江毅.平面光波导热应力分析的改进平面应变模型[J].光通信研究,2019(02):47-50.

LI Chang-an, QUAN Ben-qing, GUAN Wei-lin, et al. Improved Plane Strain Model for Thermal Stress Analysis of Planar Optical Waveguide. [J]. (2):47-50(2019)
[1]李长安,全本庆,关卫林,江毅.平面光波导热应力分析的改进平面应变模型[J].光通信研究,2019(02):47-50. DOI： 10.13756/j.gtxyj.2019.02.011.

LI Chang-an, QUAN Ben-qing, GUAN Wei-lin, et al. Improved Plane Strain Model for Thermal Stress Analysis of Planar Optical Waveguide. [J]. (2):47-50(2019) DOI： 10.13756/j.gtxyj.2019.02.011.

摘要

为了提高采用有限元分析平面光波导热应力的精度和效率

提出了一种改进平面应变模型。通过将材料的热膨胀系数正交各向异性化

材料垂直于波导传播方向的热膨胀系数为真实的热膨胀系数

但沿波导传播方向的热膨胀系数经过适当的变换可满足变形协调和适应平面应变模型

采用改进的平面应变模型

计算了平面光波导的热应力。计算结果表明

与广义平面应变模型相比

用改进的平面应变模型得到的应力的最大误差只有0.4%

而计算时间缩短为广义平面应变模型的12.6%

与平面应变模型相比

改进平面应变模型的计算时间相等

而计算精度大幅提高。

Abstract

In order to improve the accuracy and efficiency of the thermal stress analysis of the planar optical waveguide by the finite element method

an improved plane strain model is presented. In this improved plane strain model

the thermal expansion coefficient of materials is described in orthogonal anisotropic way

and the material’s thermal expansion coefficient in the direction perpendicular to the propagation of the waveguide remains the actual material’s thermal expansion coefficient. However

the thermal expansion coefficient of material along the direction of propagation of the waveguide is changed appropriately to maintain deformation coordination. With the modified material model

the thermal stress of the planar optical waveguide is calculated by the ordinary plane strain model. The calculation results show that the maximum error of the stress obtained by the improved plane strain model is only 0.4% compared with the generalized plane strain model

and the calculation time is reduced to 12.6% of the generalized plane strain model. Compared with the ordinary plane strain model

the calculation precision of the improved plane strain model is greatly improved with almost same calculation time.

关键词

平面光波导热应力改进平面应变模型有限元

Keywords

planar optical waveguidethermal stressimproved plane strain modelfinite element

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Comparative Study on Clockwise-anticlockwise Torsion Characteristics of Composite Submarine Cable

Analysis of Vibration Characteristics of Optical Fiber Composite Submarine Cable under Anchoring

Study on Reliability of Photoelectric Structure in Flexible Printed Circuit Board under Thermal Stress

Dynamic Finite Element Analysis of Fiber-Optic Composite Submarine Cable Under Wave

Finite Element Analysis of the Effect of Pulling Force on Each Layer of Cable in the Process of Laying Submarine Cable

Related Author

No data

Related Institution

Zhejiang Huadong Engineering Consulting Limited Company

State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University

Department of Electronic and Communication Engineering

Hebei Key Laboratory of Power Internet of Things Technology

Baoding Key Laboratory of Optical Fiber Sensing and Optical Communication Technology, North China Electric Power University

⁰