Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor

ZENG Wei-you; WANG Qing-lan; XU Li

doi:10.13756/j.gtxyj.2020.05.009

您当前的位置：

首页 >

文章列表页 >

Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor

- Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor
- Study on Optical communication Issue 5, Pages: 37-41(2020)
- 作者机构：
  
  湖北汽车工业学院理学院
- 作者简介：
- 基金信息：
- DOI：10.13756/j.gtxyj.2020.05.009
  CLC： TP212
- Published：2020，
扫描看全文
[1]曾维友,王晴岚,徐利.高灵敏光子晶体光纤温度传感器的特性分析[J].光通信研究,2020(05):37-41.

ZENG Wei-you, WANG Qing-lan, XU Li. Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor. [J]. (5):37-41(2020)
[1]曾维友,王晴岚,徐利.高灵敏光子晶体光纤温度传感器的特性分析[J].光通信研究,2020(05):37-41. DOI： 10.13756/j.gtxyj.2020.05.009.

ZENG Wei-you, WANG Qing-lan, XU Li. Characteristic Analysis of Highly Sensitive Photonic Crystal Fiber Temperature Sensor. [J]. (5):37-41(2020) DOI： 10.13756/j.gtxyj.2020.05.009.

摘要

针对填充液体的光子晶体光纤温度传感器灵敏度较低的问题

文章提出了一种基于模式耦合的高灵敏光子晶体光纤温度传感器

光子晶体光纤的纤芯作为传光通道

填充液态乙醇和氯仿的液芯作为耦合通道

当纤芯与液芯发生模式耦合时

纤芯的限制损耗谱会出现一个狭窄的损耗尖峰。损耗峰的位置随温度的变化而漂移。光子晶体光纤的纤芯和液芯相互独立

可以分别调整其传输特性。利用有限差分算法对传感器的特性进行了仿真研究

结果表明

设计的光纤结构具有良好的温度传感特性

耦合波长随温度升高而红移

在10～35℃范围内

温度检测灵敏度最高可达44.16 nm/℃

光纤结构参数的变化对灵敏度影响较小。

Abstract

Aiming at the problem of low sensitivity of liquid-filled photonic crystal fiber temperature sensor

a high-sensitivity photonic crystal fiber temperature sensor based on mode-coupling principle is proposed. We use the core of photonic crystal fiber as the light transmission channel and the liquid core filled with ethanol and chloroform as the coupling channel. When the mode coupling occurs between the fiber core and liquid core

a narrow high loss peak is formed in the confinement loss spectrum. The position of the loss peak shifts with the change of temperature. Because the core and the liquid core of the photonic crystal fiber are independent of each other

their transmission characteristics can be adjusted respectively. The properties of this sensor are analyzed by the finite difference method. Results show that the designed optical fiber structure has good temperature sensing characteristics

and the coupling wavelength is red-shift with the increase of temperature. The maximum sensitivity of temperature detection is up to 44.16 nm/℃ between 10℃ and 35℃

and the influence of fiber structure parameters on the sensitivity is not obvious.

关键词

光纤传感器光子晶体光纤温度传感器模式耦合限制损耗

Keywords

fiber optics sensorphotonic crystal fibertemperature sensormode couplingconfinement loss

references

更多指标>

Views

261

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Theoretical Analysis of Temperature-corrected Single-mode Fiber Macro-bending Loss Characteristics

Design of High Sensitivity Photonic Crystal Fiber Temperature Sensor

Temperature Sensor with Mach-Zehnder Filter Assisted by a Micro-Ring

Research on Temperature Sensing Characteristics of Mach-Zehnder Interferometer based on Photonic Crystal Fiber

Analysis of Flattened-Dispersion Characteristic of a New Type of Double-Mode Photonic Crystal Fiber

Related Author

No data

Related Institution

School of Electronic Engineering, Naval University of Engineering

School of Information and Control Engineering, China University of Mining and Technology

College of Electronic and Optical Engineering & College of Microelectronics, Nanjing University of Posts and Telecommunications

School of Optoelectronic Engineering,Nanjing University of Posts and Telecommunications

School of Information Engineering,East China Jiaotong University

⁰