A Method for Improving the Accuracy of Time Stamp based on Ethernet Transmission

LIU Yue-ming; DONG Hang

doi:10.13756/j.gtxyj.2021.01.007

您当前的位置：

首页 >

文章列表页 >

A Method for Improving the Accuracy of Time Stamp based on Ethernet Transmission

- A Method for Improving the Accuracy of Time Stamp based on Ethernet Transmission
- Study on Optical Communications Issue 1, Pages: 30-35(2021)
- 作者机构：
  
  1.武汉邮电科学研究院，武汉　430074
  2.烽火通信科技股份有限公司，武汉　430074
- 作者简介：
- 基金信息：
- DOI：10.13756/j.gtxyj.2021.01.007
  CLC： TN919.2
- Published：10 February 2021，
  
  Received：23 September 2020，
扫描看全文
LIU Yue-ming, DONG Hang. A Method for Improving the Accuracy of Time Stamp based on Ethernet Transmission. [J]. Study on Optical Communications (1):30-35(2021)
DOI：

LIU Yue-ming, DONG Hang. A Method for Improving the Accuracy of Time Stamp based on Ethernet Transmission. [J]. Study on Optical Communications (1):30-35(2021) DOI： 10.13756/j.gtxyj.2021.01.007.

摘要

以太网传输对时钟同步精度的要求很高，不同时钟域的切换和数据位宽变换等因素会导致精确时钟协议帧中的时间戳抖动幅度过大，严重影响时钟同步的性能。针对这一问题，文章提出了一种可以消除时间戳抖动来提高时间戳精度的方法——均匀包络速率刻画，通过刻画均匀的数据包络来保证以太网传输数据分布的均匀性，从而消除时间戳抖动，达到时钟精确同步的效果。实验数据表明，对数据进行均匀速率包络刻画后，时间戳抖动幅度明显降低，抖动消除效果较为明显，抖动范围保持在±20 ns之内。

Abstract

Ethernet transmission has high requirements of clock synchronization accuracy. Factors such as switching between different clock domains and data bit width conversion will enlarge the jitter amplitude of the time stamp in the Precision Time Protocol (PTP) frame

resulting in the problem of clock asynchronization. In order to solve this issue

this paper proposes a method that can eliminate the jitter of the time stamp to improve the accuracy of the time stamp-uniform envelope rate characterization

which ensures the uniformity of the Ethernet transmission data distribution by depicting a uniform data envelope. Therefore

the time stamp jitter can be eliminated and precise clock synchronization is achieved. Experimental data shows that after the data is characterized by a uniform rate envelope

the jitter amplitude of the time stamp is significantly reduced with obvious the jitter elimination

and the jitter range remains within±20 ns.

关键词

以太网传输精确时钟协议帧时间戳抖动均匀包络速率刻画精确同步

Keywords

Ethernet transmissionprecision time protocoltime stamp jitteruniform envelope rate characterizationprecise synchronization

references

郑翊.基于IEEE1588的高精度时间同步技术分析[J].无线电工程, 2019(6): 545-550.

庾智兰, 李智.精确时钟同步协议最佳主时钟算法[J].电力自动化设备, 2009(11): 74-77.

高海英, 朱望纯, 高志昊, 等.基于自回归算法的测控网络时钟同步设计[J].现代电子技术, 2018(13): 100-105.

姜海滨. PTP精确时钟同步协议在广播电视IP系统中的应用[J].广播电视信息, 2018(3): 27-29.

郭震津, 郑宾.基于无线网络的IEEE1588时钟同步算法[J].科学技术与工程, 2019(31): 258-262.

祝托.基于IEEE1588协议的从时钟同步技术研究[D].北京: 北京邮电大学, 2018.

IEEE Std 1588-2008, IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Contr-ol Systems[S].

王栋, 竹瑞博, 邱祖雄, 等.基于PTP的高精度频率同步恢复技术研究[J].自动化与仪器仪表, 2017(10): 144-147.

卓岩, 白涛.基于PTP协议的提高工业以太网时钟同步精度的方法研究[J].化工自动化及仪表, 2016(9): 949-952.

杨钞翔, 孔宪伟, 栾文焕, 等.基于以太网10G Base-R协议的PCS层设计[J].微电子学与计算机, 2019(2): 16-20.

IEEE Std 802.3baTM-2010, Amendment4: Media Access Control Parameters, Physical Layers, and Manage-ment Parameters for 40 Gbit/s and 100 Gbit/s Operation[S].

李文正.50 Gbit/s以太网PCS层研究及FPGA实现[D].武汉: 武汉邮电科学研究院, 2020.

章曹超.100 Gbit/s以太网PCS子层模块设计与验证[D].南京: 东南大学, 2016.

董乾, 刘勇, 赵赛.100 G以太网CGMII接口的电路设计[J].计算机光盘软件与应用, 2013(9): 82-85.

刘孜学.基于IEEE802.3ba标准下100 Gbit/s以太网PCS层多通道分发机制的研究与逻辑实现[D].成都: 西南交通大学, 2010.

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰