

浏览全部资源
扫码关注微信
国网宁夏电力有限公司,银川 750000
Published:10 December 2024,
Received:08 August 2023,
Revised:21 September 2023,
移动端阅览
刘垚. 复合绝缘子表面异常发热点识别方法[J]. 光通信研究,2024(6):230087.
Liu Y. Method for Identifying Abnormal Hot Spots on the Surface of Composite Insulators [J]. Study on Optical Communications, 2024(6):230087.
刘垚. 复合绝缘子表面异常发热点识别方法[J]. 光通信研究,2024(6):230087. DOI: 10.13756/j.gtxyj.2024.230087.
Liu Y. Method for Identifying Abnormal Hot Spots on the Surface of Composite Insulators [J]. Study on Optical Communications, 2024(6):230087. DOI: 10.13756/j.gtxyj.2024.230087.
【目的】
2
为了避免复合绝缘子热故障造成的高压输电线路运行风险,文章研究了复合绝缘子表面异常发热点识别的方法。
【方法】
2
文章分析了电流发热型、电压发热型以及综合发热型3种复合绝缘子表面异常发热形式,基于分析结果,利用光纤光栅集中测温技术,将光纤光栅传感器布设于复合绝缘子附近,采用光纤光栅集中测温单元计算相应波长偏移量及温度变化值,将变化值经数字信号处理单元解析后,生成复合绝缘子热图像。之后,文章使用最大类间方差法分割复合绝缘子热图像,计算复合绝缘子热图像的平均灰度,获取最优阈值划分复合绝缘子热图像中的像素。根据复合绝缘子热图像分割结果,利用像素统计方法,统计复合绝缘子分割图像横向的行像素点,划分复合绝缘子结构区域。依据带电设备热图像诊断应用规范,结合光纤光栅集中测温原理,将光纤光栅传感器采集的复合绝缘子热图像以伪彩色呈现复合绝缘子表面温度分布情况。最后,通过目标图像各结构区域间的温度关系,实现复合绝缘子表面异常发热点的识别。
【结果】
2
实验结果表明,该方法能够准确测量复合绝缘子表面任意点温度,最大均方根误差仅为1.39%;能有效划分复合绝缘子分割图像的结构区域,各结构之间分界明显,不存在重合现象。
【结论】
2
使用文章所提方法识别高压输电线路上不同区域的复合绝缘子表面异常发热点的性能均较为理想,复合绝缘子结构区域划分效果较为优良。
【Objective】
2
To avoid the operational risk of high-voltage transmission lines caused by thermal faults of composite insulators
a method for identifying abnormal hot spots on the surface of composite insulators is studied.
【Methods】
2
Three types of abnormal surface heating forms of composite insulators
current heating type
voltage heating type
and comprehensive heating type
are analyzed. Based on the analysis results
the fiber Bragg grating centralized temperature measurement technology is used to deploy the fiber Bragg grating sensor near the composite insulator. The fiber optic dispersion centralized temperature measurement unit is used to calculate the corresponding wavelength offset and temperature change value. After being analyzed by the digital signal processing unit
the thermal image of the composite insulator is generated. Using the maximum inter class variance method to segment the thermal image of composite insulators
the average gray level of the thermal image of composite insulators is calculated
and the optimal threshold to partition the pixels in the thermal image of composite insulators is obtained. Based on the thermal image segmentation results of composite insulators
pixel statistical methods are used to calculate the horizontal row pixel points of the composite insulator segmentation image and divide the structural area of the composite insulator. According to the application specification of thermal image diagnosis for live equipment and the principle of fiber grating centralized temperature measurement
the thermal image of composite insulator collected by the fiber grating sensor is displayed in pseudo color to show the surface temperature distribution of composite insulator. The abnormal hot spots on the surface of composite insulators are identified through the temperature relationship among various structural regions of the target image.
【Results】
2
The experimental results show that this method can accurately measure the temperature of any point on the surface of composite insulators
and the maximum Root-mean-square deviation is only 1.39%. It is shown that the proposed method can effectively divide the structural regions of composite insulator segmentation images
with clear boundaries between each structure and no overlap phenomenon.
【Conclusion】
2
The recognition performance of abnormal hot spots on the surface of composite insulators in different areas of high-voltage transmission lines is relatively ideal
and the division effect of composite insulator structure areas is relatively good.
光纤光栅集中测温复合绝缘子异常发热点最大类间方差像素统计
fiber bragg gratingcentralized temperature measurementcomposite insulatorabnormal hot spotmaximum interclass variancepixel statistics
刘立帅, 郭晨鋆, 王黎明, 等. 基于频域热特征成像的复合绝缘子缺陷检测方法[J]. 中国电机工程学报, 2019, 39(8):2498-2505.
Liu L S, Guo C J, Wang L M, et al. Defects Detection Method for Composite Insulators based on Frequency Thermal Characteristics Imaging[J]. Proceedings of the CSEE, 2019, 39(8):2498-2505.
贾勇勇, 李玉杰, 陶加贵, 等. GW6B-252型隔离开关异常发热数值仿真与实验对比分析[J]. 高压电器, 2020, 56(3):240-246.
Jia Y Y, Li Y J, Tao J G, et al. Numerical Simulation and Experimental Analysis on Abnormal Overheating of GW6B-252 High-voltage Disconnector[J]. High Voltage Apparatus, 2020, 56(3):240-246.
张施令. 基于图像深度学习与三维电场仿真的电力用复合绝缘子缺陷挖掘分析[J]. 水电能源科学, 2019, 37(9):197-201.
Zhang S L. Defect Mining and Analysis of Electric Power Composite Insulator based on Image Deep Learning and Three-dimensional Electric Field Simulation[J]. Water Resources and Power, 2019, 37(9):197-201.
周正钦, 冯振新, 周东国, 等. 基于扩展Meanshift电气设备发热故障区域提取方法[J]. 红外技术, 2019, 41(1):78-83.
Zhou Z Q, Feng Z X, Zhou D G, et al. Fault Region Extraction of Electrical Equipment in Infrared Image by Using an Extended Mean Shift Method[J]. Infrared Technology, 2019, 41(1):78-83.
郭晨鋆, 涂彦昕, 刘立帅, 等. 复合支柱绝缘子界面热波模型及其界面缺陷无损检测方法[J]. 中国电机工程学报, 2021, 41(20):7160-7169.
Guo C J, Tu Y X, Liu L S, et al. Interfacial Thermal Wave Model of Composite Post Insulator and Its Nondestructive Detection Method on Interfacial Defects[J]. Proceedings of the CSEE, 2021, 41(20):7160-7169.
王永平, 张红民, 彭闯, 等. 基于YOLO v3的高压开关设备异常发热点目标检测方法[J]. 红外技术, 2020, 42(10):983-987.
Wang Y P, Zhang H M, Peng C, et al. The Target Detection Method for Abnormal Heating Point of High-voltage Switchgear based on YOLO v3[J]. Infrared Technology, 2020, 42(10):983-987.
刘云鹏, 裴少通, 武建华, 等. 基于深度学习的输变电设备异常发热点红外图片目标检测方法[J]. 南方电网技术, 2019, 13(2):27-33.
Liu Y P, Pei S T, Wu J H, et al. Deep Learning based Target Detection Method for Abnormal Hot Spots Infrared Images of Transmission and Transformation Equipment[J]. Southern Power System Technology, 2019, 13(2):27-33.
郭海涛, 孙玉洲, 李付永, 等. 高压隔离开关用复合绝缘子设计分析及其特性研究[J]. 高压电器, 2020, 56(12):141-147.
Guo H T, Sun Y Z, Li F Y, et al. Design Analysis and Characteristic Research of Composite Insulator for High-voltage Disconnector[J]. High Voltage Apparatus, 2020, 56(12):141-147.
周振宇, 张钰民, 孟凡勇, 等. 面向电机测温的嵌套结构管式光纤光栅传感器[J]. 半导体光电, 2021, 42(2):201-206.
Zhou Z Y, Zhang Y M, Meng F Y, et al. A Nested Structure Tubular Fiber Bragg Grating Sensor for Motor Temperature Measurement[J]. Semiconductor Optoelectronics, 2021, 42(2):201-206.
张佳斌, 贺庆, 张青超. 光纤光栅传感器阵列在空间温度场测量中的应用[J]. 激光与红外, 2020, 50(6):724-728.
Zhang J B, He Q, Zhang Q C. Application of Fiber Bragg Grating Sensor Array in Space Temperature Field Measurement[J]. Laser & Infrared, 2020, 50(6):724-728.
赵龙波, 毕勇, 赵龙翔. 防雷线路复合绝缘子并联间隙电场分布仿真[J]. 计算机仿真, 2019, 36(7):100-103.
Zhao L B, Bi Y, Zhao L X. Simulation of Electric Field Distribution in Parallel Gap of Composite Insulators for Lightning Protection Lines[J]. Computer Simulation, 2019, 36(7):100-103.
黄新宇, 张洋, 王黎明, 等. 基于Mask-RCNN算法的复合绝缘子串红外图像分割与温度读取[J]. 高压电器, 2021, 57(9):87-94.
Huang X Y, Zhang Y, Wang L M, et al. Infrared Image Segmentation and Temperature Reading of Composite Insulator Strings based on Mask-RCNN Algorithm[J]. High Voltage Apparatus, 2021, 57(9):87-94.
高嵩, 陆倚鹏, 王笑倩, 等. 基于深度学习的悬式瓷绝缘子红外图像识别方法[J]. 电力科学与技术学报, 2020, 35(5):119-125.
Gao S, Lu Y P, Wang X Q, et al. Infrared Image Recognition Method of Porcelain Disc-suspended Insulators based on Deep Learning Technology[J]. Journal of Electric Power Science and Technology, 2020, 35(5):119-125.
唐小煜, 黄进波, 冯洁文, 等. 基于U-net和YOLO v4的绝缘子图像分割与缺陷检测[J]. 华南师范大学学报(自然科学版), 2020, 52(6):15-21.
Tang X Y, Huang J B, Feng J W, et al. Image Segmentation and Defect Detection of Insulators based on U-net and YOLO v4[J]. Journal of South China Normal University (Natural Science Edition), 2020, 52(6):15-21.
聂斌, 王曦, 胡雪. 非正态变异下的非线性轮廓异常点识别方法研究[J]. 运筹与管理, 2019, 28(1):101-107.
Nie B, Wang X, Hu X. Nonlinear Profile Outlier Detection for Non-normal Variation[J]. Operations Research and Management Science, 2019, 28(1):101-107.
0
Views
0
下载量
0
CSCD
0
CNKI被引量
Publicity Resources
Related Articles
Related Author
Related Institution
鄂公网安备 42011202002092号