550 K高温下激光器腔面温度的影响研究

杨振强; 贾华宇; 孙元新; 罗飚

doi:10.13756/j.gtxyj.2023.01.008

您当前的位置：

首页 >

文章列表页 >

550 K高温下激光器腔面温度的影响研究

光电器件研究与应用 | 更新时间：2023-01-16

- 550 K高温下激光器腔面温度的影响研究
- Study on the Effect of Laser Cavity Surface Temperature at 550 K High Temperature
- 光通信研究 2023年第1期页码：63-67
- 作者机构：
  
  1.太原理工大学　电气与动力工程学院，太原　030000
  2.武汉光迅科技股份有限公司，武汉　430074
- 作者简介：
  
  杨振强（1996-），男，河南商丘人。硕士，主要研究方向为激光器的腔面温度测量及优化。
  贾华宇，副教授。E-mail：jiahuayu@mail.xdtu.edu.cn
- 基金信息：
  
  国家重点研发计划资助项目(2018YFB2200900)
- DOI：10.13756/j.gtxyj.2023.01.008
  中图分类号： TN242
- 纸质出版日期：2023-02-10，
  
  收稿日期：2022-04-25，
扫描看全文
杨振强，贾华宇，孙元新，等.550K高温下激光器腔面温度的影响研究[J].光通信研究，2023(1)：63-67

YANG Z Q, JIA H Y, SUN Y X, et al.Study on the Effect of Laser Cavity Surface Temperature at 550K High Temperature[J]. Study on Optical Communications, 2023(1):63-67
杨振强，贾华宇，孙元新，等.550K高温下激光器腔面温度的影响研究[J].光通信研究，2023(1)：63-67 DOI： 10.13756/j.gtxyj.2023.01.008.

YANG Z Q, JIA H Y, SUN Y X, et al.Study on the Effect of Laser Cavity Surface Temperature at 550K High Temperature[J]. Study on Optical Communications, 2023(1):63-67 DOI： 10.13756/j.gtxyj.2023.01.008.

摘要

针对激光器长期高温工作时腔面温度急剧升高产生灾变性光学损伤（COD）的问题，文章提出在半导体激光器腔面处加入Al

膜和陶瓷隔热共同作用，其可以降低激光器腔面温度，防止COD的产生。文章首先建立了半导体激光器简化模型分析固体传热。然后对550 K高温下无镀膜无隔热结构、有镀膜无隔热结构、无镀膜有隔热结构及镀膜与隔热结构共同作用时激光器模型的腔面温度进行仿真。其中镀膜选用Al

，隔热结构选用陶瓷隔热，腔面材料选用GaAs，热沉选用Cu热沉，接触层选用AlGaAa。4组对比实验结果表明，镀膜与隔热结构共同作用时，能将激光器的腔面温度控制在393.15 K以下。550 K高温在激光器腔面处镀膜和隔热结构双重作用下，能够有效防止COD产生，提高激光器的使用寿命。

Abstract

In order to solve the problem of Catastrophic Optical Damage (COD) caused by the rapid rise of the cavity surface temperature during the long-term high temperature operation of the laser

it is proposed that the addition of Al

coating and the thermal insulation structure together at the semi-conductor laser surface

it can reduce the temperature of laser cavity surface and prevent the generation of COD. First

a simplified semi-conductor laser model is established to analyze solid heat transfer. Then

the cavity surface temperature of the laser model is simulated at 550 K when there is no coating and no insulation structure

coating and no insulation structure

no coating and insulation structure

and when the coating and insulation structure act together

the ceramic heat insulation is used in the heat insulation structure

GaAs is used in the cavity surface material

Cu is used in the heat sink and AlGaAs is used in the contact layer. The results of 4 groups of contrast experiments show that the temperature of the cavity surface can be controlled below 393.15 K when the coating and the thermal insulation structure act together. 550 K high temperature in the laser cavity surface coating and thermal insulation structure under the dual protection

can effectively prevent the generation of COD

so that the life of the laser can be improved.

关键词

半导体激光器灾变性光学损伤镀膜隔热结构

Keywords

semiconductor laserCODcoatingthermal insulation structure

references

华红洋. 半导体激光器腔面损伤的研究[D]. 太原: 太原理工大学, 2021.

Hua H Y. Study on Cavity Surface Damage of Semiconductor Lasers[D]. Taiyuan: Taiyuan University of Technology, 2021.

Yang H, Zhang B, Hu Y. A Real-time Marking Defect Inspection Method for IC Chips [C]//Seventh International Conference on Graphic and Image Processing. Singapore: SPIE, 2015: 12.2228808.

宋悦, 宁永强, 秦莉, 等. 大功率半导体激光器抗腔面灾变性光学损伤技术综述[J]. 半导体光电, 2020, 41(5): 618-626.

Song Y, Ning Y Q, Qin L, et al. Review of High-power Semiconductor Lasers Against Cavity Surface Catastrophic Optical Damage[J]. Semiconductor Optoelectronics, 2020, 41(5): 618-626.

Liu Z, Wei Y, Chen S, et al. Characterization of 1 064 nm Laser Induced Damage in ALD Optical Film[J]. Journal of Applied Optics, 2011, 32(2): 373-376.

郑晓刚, 李特, 芦鹏, 等. 980 nm半导体激光器腔面温度特性分析[J]. 中国激光, 2013(11): 21-24.

Zheng X G, Li T, Lu P, et al. Analysis of Temperature Characteristics of 980 nm Semiconductor Laser Cavity Surface[J]. China Laser, 2013(11): 21-24.

温盛宇. 微缺陷诱导的半导体激光器腔面热效应研究[D]. 太原: 太原理工大学, 2021.

Wen S Y. Microdefect-Induced Cavity Surface Thermal Effect of Semiconductor Lasers[D]. Taiyuan: Taiyuan University of Technology, 2021.

李再金, 胡黎明, 王烨, 等. 808 nm含铝半导体激光器的腔面镀膜[J]. 光学精密工程, 2010, 18(6): 1258-1263.

Li Z J, Hu L M, Wang Y, et al. Cavity Surface Coating of 808 nm Aluminum-containing Semiconductor Laser[J]. Optical Precision Engineering, 2010, 18(6): 1258-1263.

Zhang S Y, Feng S W, Zhang Y M, et al. Monitoring of Early Catastrophic Optical Damage in Laser Diodes based on Facet Reflectivity Measurement[J]. Applied Physics Letters, 2017, 110(22): 223503.

Michaud J, Vecchio D P, Béchou L, et al. Precise Facet Temperature Distribution of High-power Laser Diodes: Unpumped Window Effect[J]. IEEE Photonics Technology Letters, 2015, 27(9): 1002-1005.

Sun H, Ma L, Najeem A, et al. Background Thermal Noise Correction Methodology for Average Infrared Radiation Temperature of Coal under Uniaxial Loading[J]. Infrared Physics & Technology, 2017, 81: 157-165.

Ouyang S, Liu Z, Xu Q. Surface Damage Precursors in Triple‐frequency Fused Silica[J]. Journal of Applied Optics, 2011, 32(6): 1257-1262.

Hui L, Li B, Wang X, et al. Automated Defect Inspection of LED Chip Using Deep Convolutional Neural Network[J]. Journal of Intelligent Manufacturing, 2019, 30(6): 2525-2534.

徐嘉茂, 毛德华, 唐东梅. 外墙围护结构对自然室温影响的研究[J]. 东莞理工学院学报, 2020, 27(1): 70-77.

Xu J M, Mao D H, Tang D M. Study on the Influence of External Wall Enclosure Structure on Natural Room Temperature[J]. Journal of Dongguan University of Technology, 2020, 27(1): 70-77.

王晓玲. 大功率半导体激光器腔面膜的研究[D]. 北京: 北京工业大学, 2014.

Wang X L. Study on High-power Semiconductor Laser Cavity Mask[D]. Beijing: Beijing University of Technology, 2014.

栾强, 隋学叶, 崔唐茵, 等. 高性能陶瓷隔热材料的研制[J]. 现代技术陶瓷, 2011, 32(4): 17-19.

Luan Q, Sui X Y, Cui T Y. Development of High-performance Ceramic Thermal Insulation Materials[J]. Modern Technical Ceramics, 2011, 32(4): 17-19.

陈宇, 李冬, 孙陈诚, 等. 刚性陶瓷隔热瓦热-力耦合作用响应特性研究[J]. 工程热物理学报, 2020, 41(12): 3020-3029.

Chen Y, Li D, Sun C C. Study on the Response Characteristics of Thermal-mechanical Coupling of Rigid Ceramic Thermal Insulation Tiles[J]. Journal of Engineering Thermophysics, 2020, 41(12): 3020-3029.

赵森. 中厚板差温轧制及变形渗透性的数值模拟与实验研究[D]. 沈阳: 东北大学, 2015.

Zhao S. Digiyal Simulation and Experimental Study on Differential Temperature Rolling and Deformation Permeability of Medium and Heavy Plates[D]. Shenyang: Northeastern University, 2015.

张文博. 某型取力器结构优化及其动态特性分析[D]. 贵阳: 贵州大学, 2015.

Zhang W B. Structural Optimization of a Certain Type of Power Take-off and Analysis of Its Dynamic Characteristics[D]. Guiyang: Guizhou University, 2015.

更多指标>

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于取样光栅的可调谐激光器的设计与研究

基于REC技术的氮化铟DFB激光器仿真分析

基于REC技术的氮化镓激光器仿真分析

同轴封装半导体激光器的散热研究

温度对FBG外腔半导体激光器模式的影响