
浏览全部资源
扫码关注微信
1.江苏亨通光纤科技有限公司 新型特种光纤及光纤预制棒重点实验室,江苏 苏州 215200
2.上海大学 特种光纤与光接入网重点实验室,上海 200444
3.江苏亨通光导新材料有限公司 芯棒研发部,江苏 苏州 215200
张功会(1988-),男,安徽萧县人。高级工程师,硕士,主要研究方向为新型特种光纤和器件。
陈伟,教授。E-mail:chenweiSD@shu.edu.cn
纸质出版日期:2023-04-10,
收稿日期:2022-11-30,
修回日期:2022-12-10,
扫 描 看 全 文
张功会,陈伟,孙伟,等. 多芯光纤熔接与测试研究[J].光通信研究,2023(2):19-22.
Zhang G H, Chen W, Sun W, et al. Research on Splicing and Testing of Multi-core Optical Fiber [J].Study on Optical Communications,2023(2):19-22.
张功会,陈伟,孙伟,等. 多芯光纤熔接与测试研究[J].光通信研究,2023(2):19-22. DOI: 10.13756/j.gtxyj.2023.02.003.
Zhang G H, Chen W, Sun W, et al. Research on Splicing and Testing of Multi-core Optical Fiber [J].Study on Optical Communications,2023(2):19-22. DOI: 10.13756/j.gtxyj.2023.02.003.
多芯光纤(MCF)是空分复用(SDM)技术的重要传输介质,能够数倍地拓展现有单根光纤的通信容量,然而MCF结构复杂度高、测试难度大,尚无测试标准。文章根据MCF的结构特点,结合在MCF开发中的技术经验,规范了MCF的熔接方法以及主要参数的测试方法,为未来MCF的大规模商用化奠定了基础。
Multi Core Fiber (MCF) is an important transmission medium of Space Division Multiplexing (SDM) technology
which can significantly enhance the communication capacity of existing optical fiber. However
MCF has the problems of high structural complexity
difficult to test
and no test standard for parameters. According to the structural characteristics
combined with the technical experience in the development
this paper standardize the splicing method and the parameters testing method of MCF
which lays the foundation for the large-scale commercialization of MCF in the future.
多芯光纤多芯光纤熔接多芯光纤测试空分复用香农极限
MCFMCF splicingMCF testingSDMShannon limit
中国互联网协会. 中国互联网发展报告(2022)[R]. 北京: 中国互联网协会, 2022.
Internet Society of China. China Internet Development Report (2022)[R]. Beijing: Internet Society of China, 2022.
Sakaguchi J, Puttnam B J, Klaus W, et al. 19-core Fiber Transmission of 19×100×172 Gb/s SDM-WDM-PDM-QPSK Signals at 305 Tb/s [C]//Optical Fiber Communication Conference. Los Angeles, CA, USA: IEEE, 2012: PDP5C.1.
GB/T 15972.20-2008,光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序——光纤几何参数[S].
GB/T 15972.20-2008, Specifications for Optical Fibre Test Methods--Part 20: Measurement Methods and Test Procedures for Dimensions--Fiber Geometry[S].
GB/T 15972.21-2008,光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序——涂覆层几何参数[S].
GB/T 15972.21-2008, Specifications for Optical Fibre Test Methods--Part 21: Measurement Methods and Test Procedures for Dimensions--Coating Geometry[S].
GB/T 15972.45-2008,光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序——模场直径[S].
GB/T 15972.45-2008, Specifications for Optical Fibre Test Methods--Part 45: Measurement Methods and Test Procedures for Transmission and Optical Characteristics--Mode Field Diameter[S].
GB/T 15972.44-2017,光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序——截止波长[S].
GB/T 15972.44-2017, Specifications for Optical Fibre Test Methods--Part 44: Measurement Methods and Test Procedures for Ttransmission and Optical Characteristics--Cut-off Wavelength[S].
Hayashi T, Nagashima T, Shimakawa O, et al. Crosstalk Variation of Multi-core Fiber Due to Fiber Bend[C]//European Conference and Exhibition on Optical Communication. Torino, Italy: ECOC, 2010: We.8.F.6.
0
浏览量
17
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
鄂公网安备 42011202002092号