摘要:The paper suggests to consider synchronous optical fiber communication network with new digital hierarchy; to fully utilize the installation of optical amplifiers in eliminating the use of regenerative repeater; to encourage the trial applications of densely packed multiple optical carrier systems and coherent communication systems on toll lines, and to accelerate the research on optoelectronic integration technology.The object of all these developments is to fully exploit the huge potential capacity of the optical fiber,as well as to reduce the quantity of hardware components so as to ensure high system reliability.
摘要:In this paper, the principle of the stress corrosion and fatigue resistance of the optical fiber is described. Two approaches to the realization of the reliability of mechanical properties in making fatigueproof optical fibers have been given. The former is to reduce the stress from the fiber by using the compressive cladding technique, the latter is to isolate the fiber from the atmospheric environment by using the hermetical technique. The perspectives of the application of fatigueproof fibers are also described.
摘要:In this paper, the detailed theoretical analysis of the azimuthal filtering technique of cut-off wavelength has been carried ont and compared with the communication power method. The experimental set-up and the measurement on the cut-off wavelength of the conventional SM fibers are also described. The results are in fundamental agreement with that of communication power method and the calculation of matrix cut-off wavelength.
摘要:How to obtain the needful overlength of loose-tube optical fiber on the secondary coating line when the number of overlength has been determined? Which factors will influence the overlength of loose-tube optical fiber on the secondary coating line?-These will be discussed in this paper.
摘要:In this paper, generation methods of ps optical pulse from semiconductor laser diodes are summarized. These methods include mode-locking, gain-switching, electrical feedback, optoelectronic feedback and Q-switching etc. State-of-the-art and the future prospect of the various technologies for generating optical pulse are also introduced.
摘要:In this paper, the metallized package workmanship of long wavelength light source devices is described. The reliability of the novel products made with this process has passed the proof test and achieved successful result. In particular, YAG laser welding technique has satisfied the fiber positioning process.
摘要:In this paper, the dependences of the dark current and optical multiplication factor on temperature for InGaAs/InGaAsP/InP SAGM-APD have been investigated and measured. Experiments show that the dark current will increase 10 to 30 times when the temperature rises up from 20℃ to 90℃,and the optical multiplication factor Mp will decrease by about 1/3 when the temperature rises from 20℃ to 60℃.The phenomena observed during the measurement are discussed. The paper also suggests to eliminate the nonsuitable chips for the SAGM-APD by the critical high-to-low temperature cycling.